Figure 11-21 Installing The System Board; Figure 11-22 System Board Captive Screws - Sun Microsystems SPARCstation 5 Service Manual

c. Slide the board along the card guide until it is fully inserted.

Figure 11-21 Installing the System Board

2. Tighten the two captive Phillips screws that secure the board to the rear
of the chassis.
See Figure 11-22. Do not overtighten these screws.
Captive screw

Figure 11-22 System Board Captive Screws

System Board and Component Replacement
Card guide
System board
11
Captive screw
11-21