Sun Microsystems Ultra 30 Installation Manual page 13

7. Fasten the mounting tray to the mounting rails (
a. Using two of the provided screws, fasten the rear of the tray to the rails.
Feed the screws through the flanges from the rear side of the flange. This helps to
align the fastening holes in the front flanges.
b. Using two of the provided screws, fasten the front of the tray to the rails.
The screws should be fed through the tray flange into the rail flange from the top.
Fastening the Mounting Tray to the Mounting Rails
FIGURE 7
FIGURE 7
Sun Ultra 30/60/80 Systems Rackmount Installation Guide
).
9