Internal Connectors - Aaeon MIX-H310D1 Manual

5. Line Out port (green). This port connects to a headphone or a speaker. In a
4-channel, 6-channel and 8-channel configurations, the function of this port
becomes Front Speaker Out.
6. Microphone port (pink). This port connects a microphone.
NOTE: Refer to the audio configuration table for the function of the audio ports
in the 2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Pink (Rear panel)
Green (Rear panel) Line Out
2.7.2

Internal connectors

1. SATA power connector (4-pin SATA_PWR)
This connector is for the SATA power cable. The power cable plug is
designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
MIX-H310D1
MIX-H310D1 SATA POWER connector
2. Audio amplfier connector (4-pin AMP_CON)
This connector is for an internal stereo amplifier speakers support (2W/4
via WtoB header).
MIX-H310D1
MIX-H310D1 Audio Stere.
Output with Amp connector
Chapter 2: Motherboard information
Headset
4-channel
2-channel
Mic In Mic In
Front
Speaker Out
SATA_PWR
+12V
GND
GND
+5V
AMP_CON
PIN 1
6-channel 8-channel
Bass/Center Bass/Center
Front Speaker
Front Speaker Out
Out

2-17