Advanced Operation; Headset Operation; Belt Clip - VTech ip5856 User Manual

Headset Operation

Your ip 5856 Handset is equipped with a 2.5mm Headset Jack for use with
an optional accessory Headset for handsfree operation. If you choose to
use the Headset option, you must obtain an optional accessory Headset
that is compatible with the ip 5856. For best results use a VTech 2.5mm
headset.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on
the ip 5856 Handset. Connect the plug on the Headset cord to the jack (under a
small rubber flap) on the cordless Handset. The plug should fit securely. Do not
force the connection.
NOTE:
• Whenever a compatible Headset
is connected to the cordless
Handset, the microphone on the
Handset will be muted. This is
done to limit the effect of
background noise.
• When a compatible Headset is
connected to the cordless
Handset, your Speakerphone
feature will be disabled. To use
your Speakerphone feature,
simply disconnect the Headset
from the Handset.

Belt Clip

The ip 5856 is also equipped with a
detachable belt clip. Align the pins
on the inside edge of the clip with
the notches on the sides of the
Handset. The belt clip should snap
securely into
30