Table of Contents
Advertisement
3)
Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4)
Press as to select [DEVICE
5)
Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE]
[POWER ON]
[POWER ON/OFF]
Note
f The connected CEC-compatible device may not support the link operation described in the manual. Not all the operations of the CEC-
compatible device are guaranteed.
[INITIALIZE]
Return the various user data settings to the factory default settings.
1)
Press as to select [INITIALIZE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4)
Press as to select an item to initialize.
[USER SETTINGS]
[REGISTERED SIGNAL ONLY]
[NETWORK/E-MAIL ONLY]
[LOGO IMAGE ONLY]
[UNIFORMITY ONLY]
[FACTORY RESET]
f Proceed to Step 5) when anything other than [USER SETTINGS] is selected.
190 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
->
PROJECTOR].
Disables the power link operation from the CEC-compatible device to the projector.
Select this item if you do not want the power status of the projector to react to the CEC-compatible device.
Enables power-on link operation.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal, <HDMI
IN 2> terminal or Function Board is turned on, the projector turns on, starts projection, and switches to the
input that the linked CEC-compatible device is connected.
While the projector is in standby, if the CEC-compatible device starts playing, the projector turns on, starts
projection, and switches to the input that the linked CEC-compatible device is connected.
While the projector is turned on, if the CEC-compatible device starts playing, the projector switches to the input
that the CEC-compatible device is connected.
Power‑off link control is disabled.
Enables power‑on link operation and power‑off link operation.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal, <HDMI
IN 2> terminal or Function Board is turned on, the projector turns on, starts projection, and switches to the
input that the CEC-compatible device is connected.
While the projector is in standby, if the CEC-compatible device starts playing, the projector turns on, starts
projection, and switches to the input that the CEC-compatible device is connected.
While the projector is turned on, if the CEC-compatible device starts playing, the projector switches to the input
that the CEC-compatible device is connected.
While the projector is turned on, if the CEC-compatible device connected to the <HDMI IN 1> terminal, <HDMI
IN 2> terminal or Function Board is turned off, the projector turns off and enters standby mode.
The link operations are only available when the CEC-compatible device supports the respective operations.
The user data to return to factory default settings can be selected arbitrarily.
The projector goes into the standby status after executing [INITIALIZE].
For details of operation, refer to "Initializing the settings by selecting the items" (x page 191).
Deletes all the signals registered in [SIGNAL LIST]. All the setting values saved for each registered
signal are also deleted.
Returns all the setting items under the [NETWORK] menu and all the setting items under the
operation page in the [Detailed set up] page and the Crestron Connected of the web control screen to
the factory default settings.
f The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
f The information such as the self‑signed certificate already created in the [Certificate] page of the
web control screen or the server certificate already installed is not deleted.
Deletes the image registered in [USER LOGO].
Sets the setting of the [DISPLAY OPTION] menu → [UNIFORMITY] to the factory default setting.
Returns all the user data settings to the factory default settings. The projector goes into the standby
status after executing [FACTORY RESET].
Advertisement
Table of Contents
