Table of Contents
Advertisement
r [Server]
Configure the setting required to access the projector assigned to a server using the control system.
1
[Use TLS]
Sets the secure communication.
[Disable]:
Performs the unsecured communication.
[Enable]:
Performs the secure communication using TLS (Transport
Layer Security).
2
[IP ID]
Sets the IP ID used to determine the projector on the network.
(A number up to four digits)
3
[Non Secure Port]
Sets the port number to be used with the unsecured
communication.
Default value: 41794
4
[Secure Port]
Sets the port number to be used with the secure
communication.
Default value: 41796
Note
f [Use TLS] will be fixed to [Disable] if neither the server certificate nor the self-signed certificate is installed.
f When [Use TLS] is set to [Disable], [Authentication] is fixed to [Disable], and [Secure Port] cannot be set.
f When [Crestron Fusion in the Cloud (FITC)] is set to [Disable], [FITC URL] cannot be entered.
r [Auto Discovery]
Set the standby process against the search protocol of the control system and the application software.
1
[Auto Discovery]
[Disable]:
Disables the standby process.
[Enable]:
Enables the standby process and enables the automatic
detection of the projector.
246 - ENGLISH
Chapter 5 Operations — Using the web control function
1
2
3
4
5
6
7
8
9
10
5
[Authentication]
Select the authentication with the connection destination used
with the secure communication.
[Disable]:
Does not perform the connection authentication.
[Enable]:
Performs the connection authentication.
6
[User Name]
Enter the user name used for the connection authentication.
(Up to 20 half-width characters)
7
[Password]
Enter the password used for the connection authentication. (Up
to 20 half-width characters)
8
[Crestron Fusion in the Cloud (FITC)]
Sets whether to use the Fusion server in the Cloud.
[Disable]:
Does not use the Fusion server in the Cloud.
[Enable]:
Uses the Fusion server in the Cloud.
9
[FITC URL]
Enter the URL of the Fusion server in the Cloud.
10 [Submit]
Updates the [Server] setting.
1
2
2
[Submit]
Update the [Auto Discovery] setting.
Advertisement
Table of Contents
