Table of Contents
Advertisement
[POWER ON/OFF]
Note
f If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
f Depending on the connected CEC-compatible device, the link control may not operate normally.
[INITIALIZE]
Return the various user data settings to the factory default settings.
1)
Press as to select [INITIALIZE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4)
Press as to select an item to initialize.
[USER SETTINGS]
[REGISTERED SIGNAL ONLY]
[NETWORK/E-MAIL ONLY]
[LOGO IMAGE ONLY]
[UNIFORMITY ONLY]
[FACTORY RESET]
f Proceed to Step 5) when anything other than [USER SETTINGS] is selected.
5)
Press the <ENTER> button.
f The confirmation screen is displayed.
6)
Press qw to select [OK], and press the <ENTER> button.
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting: awsqawsq
f To delete only a part of a registered signal, delete it following "Deleting the registered signal" (x page 158).
f To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→ [DATE AND TIME] → [TIME ZONE] to the factory default settings, initialize them with one of the following methods.
g Initializing by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g Initializing by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f The self-signed certificate already created in the [Certificate] page of the web control screen or the information of the server certificate
already installed can be deleted in the web control screen.
f If initialized by selecting [FACTORY RESET], the [INITIAL SETTING] screen is displayed when the projection is started the next time.
Initializing the settings by selecting the items
1)
Press as to select [INITIALIZE].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables power-on link control and power-off link control.
Power-on link control and power-off link control work only if it is supported by the connected CEC-compatible
device.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal or
<HDMI IN 2> terminal is turned on or starts playing, the projector turns on, starts projection, and switches
to the input that the linked CEC-compatible device is connected. While the projector is turned on, if the
CEC-compatible device starts playing, the projector switches to the input that the CEC-compatible device is
connected.
When the CEC-compatible device connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal is turned
off, the projector enters standby mode.
The user data to return to factory default settings can be selected arbitrarily.
The projector goes into the standby status after executing [INITIALIZE].
For details of operation, refer to "Initializing the settings by selecting the items" (x page 153).
Deletes all the signals registered in [SIGNAL LIST]. All the setting values saved for each registered
signal are also deleted.
Returns all the setting items under the [NETWORK] menu and all the setting items in the [Detailed set
up] page of the web control screen to the factory default settings.
f The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
f The information such as the self-signed certificate already created in the [Certificate] page of the
web control screen or the server certificate already installed is not deleted.
Deletes the image registered in [USER LOGO].
Sets the setting of the [DISPLAY OPTION] menu → [UNIFORMITY] to the factory default setting.
Returns all the user data settings to the factory default settings. The projector goes into the standby
status after executing [FACTORY RESET].
ENGLISH - 153
Advertisement
Table of Contents
