Table of Contents
Advertisement
[AUTO]
[FLOOR]
[CEILING]
Note
f Refer to "Angle sensor" (x page 43) for details on the range of the installation attitude that can be detected by the built-in angle sensor.
[LENS]
Perform the setting and operation regarding the projection lens.
[LENS TYPE]
When the projector is used for the first time or when the projection lens is replaced, confirm the [LENS TYPE]
setting.
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Confirm the type of the projection lens in [LENS TYPE].
Note
f The information of the projection lens is automatically acquired when the projector is turned on. The acquired information is displayed in
[LENS TYPE].
f [---] is displayed in [LENS TYPE] if the automatic acquisition of the projection lens information fails.
f Turn off the projector and reattach the projection lens when [‑‑‑] is displayed in [LENS TYPE].
[LENS INFORMATION SETTING]
Confirming the projection lens information
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS INFORMATION SETTING].
4)
Press the <ENTER> button.
f The [LENS INFORMATION SETTING] screen is displayed.
[LENS ID]
[LENS NAME]
[LENS TYPE]
Setting ID to the projection lens
Write the identification information unique to the projection lens into the EEPROM built in the projection lens. Set
ID if required.
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS INFORMATION SETTING].
4)
Press the <ENTER> button.
f The [LENS INFORMATION SETTING] screen is displayed.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Automatically detects the attitude of the projector by the built-in angle sensor.
Set [AUTO] normally.
Select this item when installing the projector on a desk, etc.
Select this item when installing the projector with the top surface of the projector facing down such as
ceiling attachment.
Projected image is inverted upside down.
Displays the set ID.
Displays the set name.
Displays the projection lens type.
ENGLISH - 153
Advertisement
Table of Contents
