Panasonic PT-REQ10 Operating Instructions Manual page 13

Each dimension inside the hazard zone for combination with projection lens which the hazard distance exceeds
1 m (39-3/8") is as follows.
Projection lens
Model No.
PT-REQ12 ET-C1T700
PT-REQ10
ET-C1T700
PT-REQ80
*1 HD: Hazard Distance
*2 The values of D1 to D4 will change in accordance with the lens shift amount. Each value in the table is the maximum value.
Note
f The value in the table is based on IEC/EN 62471-5:2015.
f Projection lens compatible with the projector may be added or changed without prior notice.
For the latest information, visit the following website.
https://panasonic.net/cns/projector/
Attention
f If the light projected from the projector directly enters the eyes while you are inside the hazard zone, the retinas may be
damaged. Do not enter within the hazard zone during use. Alternatively, install the projector in a location where the projected
light will not directly enter the eyes.
Read this first!
HD
*1
Model No.
2.4
1.7
D1 D2
*2 *2
0.481 0.481
0.347 0.347
(Unit: m)
D3 D4
*2 *2
0.553 0.553
0.399 0.399
ENGLISH - 13