Updating The Firmware; Updating The Firmware Via Lan - Panasonic PT-REQ10 Operating Instructions Manual

Hide thumbs Also See for PT-REQ10:
Table of Contents

Advertisement

Updating the firmware

The firmware of the projector can be updated via LAN or using a USB memory.
Firmware that can be uploaded can be downloaded from the following website ("Panasonic Professional Display
and Projector Technical Support Website"). Customer can update the firmware if a newer version than the current
firmware version is published.
https://panasonic.net/cns/projector/pass/
It is necessary to register and log in to PASS
download the firmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
r How to confirm the firmware version
Current firmware version can be confirmed by pressing the <STATUS> button on the remote control and
displaying the [STATUS] screen.
The firmware version can also be confirmed in the [PROJECTOR SETUP] menu → [STATUS].
Note
f A LAN cable is required to connect to the network via wired LAN.

Updating the firmware via LAN

Example of network connection
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect the LAN cable to the <LAN> terminal equipped on the projector as standard or the <DIGITAL LINK IN/LAN> terminal of the optional
DIGITAL LINK Terminal Board (Model No.: TY-SB01DL) installed in the slot.
f Update cannot be performed using the "IPv6" protocol. Set the [NETWORK] menu → [WIRED LAN] → [IP VERSION] to either [IPv4] or
[IPv4 & IPv6] and assign the IP address for "IPv4".
260 - ENGLISH
Chapter 5 Operations — Updating the firmware
to confirm the availability of the firmware that can be updated or to
*1
STATUS
PROJECTOR TYPE
SERIAL NUMBER
PROJECTOR RUNTIME
LIGHT RUNTIME
CONTINUOUS LIGHTING TIME
FIRMWARE VERSION
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
EXHAUST AIR TEMP.
LIGHT1 TEMP.
LIGHT2 TEMP.
SELF TEST
E-MAIL/USB
ENTER
CHANGE
Computer
LAN cable (straight)
Switching hub
1/6
PT-REQ12
123456789012
10000h
10000h / 10000h
1h 23m
1.00
31°C/87°F
27°C/80°F
31°C/87°F
31°C/87°F
31°C/87°F
NO ERRORS
EXIT
MENU
Projector
LAN cable (straight)

Advertisement

Table of Contents
loading

Table of Contents