Table of Contents
Advertisement
For wireless LAN connection
(Available only when the Wireless Module is attached to the projector)
1
[KEY]
Sets the connection key.
Enter 8 to 15 characters of single-byte alphanumeric.
[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1
[Time Zone]
Select the time zone.
2
[Set time zone]
Updates the time zone setting.
3
[NTP SYNCHRONIZATION]
Set to [ON] when setting the date and time automatically.
4
[NTP SERVER NAME]
Enter the IP address or server name of the NTP server when
you set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.)
Note
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
Chapter 5 Operations — Using the web control function
1
2
2
[Back], [Next]
Click [Back] to return to the original screen. Click [Next] to
display the setting confirmation screen. Click [Submit] to update
the setting.
1
2
3
4
5
6
7
5
[Date]
Enter the date to change when [NTP SYNCHRONIZATION] is
set to [OFF].
6
[Time]
Enter the time to change when [NTP SYNCHRONIZATION] is
set to [OFF].
7
[Set date and time]
Updates the date and time settings.
ENGLISH - 237
Advertisement
Table of Contents
