HP NetServer LH 6000 Installation Manual page 96

All manuals and user guides at all-guides.com
Chapter 8 Installing the HP NetServer in an HP Rack System/E or Rack System/U
Insert Mounting
Flange between
bar nut and rear
of column.
Press slide
tightly against
column and
tighten screws
to hold slide
in place.
Figure 8-8. Securing Slide to the Rack Column
3. Tighten both screws into the mounting flanges of each end of each slide.
4. Tighten both nuts on each slide rail to prevent the slide from slipping
positions.
88