HP NetServer LH 6000 Installation Manual page 162

All manuals and user guides at all-guides.com
Chapter 13
Note the removable
mounting flange has
been removed.
Use hex nut
and lock washer
to fasten slide
to inside face.
4. Insert the slide fixed mounting flange between the column and bar nuts.
Press the slide firmly against the front column (see Figure 13-6).
Figure 13-6. Securing the Slide to the Front Column
5. Tighten both screws in the mounting flanges of the slide.
154
Figure 13-5. Attaching the Slides
Insert mounting
flange of slides
between bar nut
and rear side of
column face.
Press slide tightly
against column and
tighten screws to
hold slide in place.
Alternative Rack Mounting
Insert two screws
through the front
column and start the
screws in a bar nut.
Insert the slide
in place behind
the column face
but in front
of the bar nut.