Assembly Instructions - Hotsy 555HE Operating Instructions And Parts Manual

Unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling or operating pressure washer.
If there are missing components or hidden damage
immediately contact distributor or carrier concerning
discrepancies.
1. Cut strapping band from pressure washer and pallet.
2. Remove pressure washer from pallet.
Parts Included
• Pressure Washer
• Pressure Hose
• Trigger Gun Assembly
• Wand Assembly
• Handle
Tools Required
• 10" Adjustable Wrench (2 ea.)
• Teflon Tape
Pressure Hose, Trigger Gun and Wand
1. Use teflon tape or thread sealant on plumbing con-
nections to prevent leakage.
2. Install pressure hose on machine as shown in
Figure 1.
Figure 1 - Pressure Hose Installation
10

ASSEMBLY INSTRUCTIONS

Relief Valve
Pressure
Hose
Manual Hotsy, 500 Series • 9.808-383.0
3. Attach the wand assembly to the pressure hose/trigger
gun assembly as shown in Figure 2.
Wand
Assembly
Pressure Hose/
Trigger Gun Assembly
Figure 2 - Wand/Trigger Gun Assembly
Handle
1. Remove plastic tubing from ends of handle.
2. Insert the handle through the holes in the chassis as
shown in Figure 3. Use the bolts, washers and nuts
from envelope to secure the handle to the chassis.
Bolts, Washers
and Nut
Figure 3 - Handle Installation
Handle