Table of Contents
Advertisement
Unpacking
Unpack carefully. Wear safety glasses or goggles while un-
packing, assembling or operating pressure washer. If there
are missing components or hidden damage immediately
contact distributor or carrier concerning discrepancies.
1. Cut strapping band from pressure washer and pallet.
2. Remove pressure washer from pallet.
Parts Included
• Pressure Washer
• Pressure Hose
• Wand
• Trigger Gun
• Operating Instructions
Tools Required
• 10" Adjustable Crescent Wrenches (2 ea.)
• Blade Screwdriver
Pressure Hose
1.
Use teflon tape on plumbing connections to prevent
leakage.
2.
Install pressure hose on machine as shown.
Pressure Hose
ASSEMBLY INSTRUCTIONS
Relief Valve
89121060-11
HOTSY 800 OIL FIRED • 8.921-206.0 • Rev. 3/13
Wand Components
1.
Assemble wand components as shown. Connect
pressure hose to trigger gun.
Quick Disconnect Plug
Trigger Gun
Pressure Hose
NOTE: The nozzle is not to be installed at this time.
2.
Make sure that all plumbing connections are tight.
Wand
Quick
Disconnect
89212060-28
9
Advertisement
Table of Contents
