Assembly Instructions - Hotsy BXA-252739 Operator's Manual

STEP 1: Adjust handle at the de-
sired position.
Pressure
Nozzle
STEP 4: Pull spring-loaded collar
of the wand coupler back to insert
your choice of pressure nozzle.
Cold
Water
Source
Garden
Hose
STEP 7: Connect garden hose to
the cold water source.
8

ASSEMBLY INSTRUCTIONS

Safety
Latch
High
Pressure Hose
STEP 2: Attach the high pressure
hose to the spray gun using tefl on
tape on hose threads.
Pressure
Nozzle
Wand
Coupler
Coupler
Collar
STEP 5: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Pump
Water Inlet
STEP 8: Check inlets fi lters, re-
move debris, then connect the
garden hose to pump water inlet.
CAUTION: Do not run the pump
without water or pump damage
will result.
BXA • 8.917-989.0 • Rev. 12/13
Spray
Gun
Wand
STEP 3: Attach wand to spray gun
using tefl on tape on wand threads.
Wand
Coupler
STEP 6: Connect the high pres-
sure hose to the discharge nipple.
Push coupler collar forward until
secure.
Garden
Hose
Spray
Gun/Wand
Discharge
Nipple
High
Pressure
Hose
Coupler Collar