Assembly Instructions
Unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling or operating pressure washer. If
there are missing components or hidden damage,
immediately contact dealer or carrier concerning
discrepancies.
1. Cut strapping band from pressure washer and
pallet.
2. Remove pressure washer from pallet.
Parts Included
•
Hotsy High Pressure Washer
•
High Pressure Hose
•
Hose/GFCI Cord Hanger
•
Wand
•
Trigger Gun
•
Operating Instruction and Parts Manual
•
Parts Bag Containing:
- Pressure Nozzle
- Quick Disconnect
- Quick Disconnect Plug
Tools Required
•
10" Adjustable Wrench (1 ea.)
•
Medium Phillips Head Screwdriver (1 ea.)
•
Large Slotted Head Screwdriver (1 ea.)
•
3/16" Allen Wrench (1 ea.)
•
Pipe Thread Sealing Compound For Gas Con-
nectors
•
Teflon Tape
1. Install Hose/GFCI Cord Hanger on coil tank as
shown.
Hose/GFCI
Cord Hanger
Pressure Hose, Trigger Gun and Wand
1. When assembling, use teflon tape on all plumbing
2. Install the pressure hose on the pressure washer
3. Assemble wand components as shown
4. Make sure all plumbing connections are tight.
Pocket on
Coil Tank
Hotsy 771 / 772 8.941-246.0 - Y
connections to prevent leakage.
as shown.
Pressure Hose
Trigger Gun
Pressure
Hose
NOTE: The pressure nozzle is not to be
installed at this time.
Operations
Valve, Safety Relief
Wand
11