Table of Contents
Advertisement
Install Front and Top Caps
1. Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm wrench.
2. Install screws securing the front cap to the tower frame using a 10 mm socket wrench and ratchet.
NOTE: Screw heads can be accessed from the top or bottom.
3. Press grommets into holes at the top of the tower frame.
4. Install screws securing the tube caps to the tower frame using a Phillips screwdriver.
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
2
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Item
1
2
3
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Page 27 of 38
Description
Front Cap
Front Shroud, Left
Front Shroud, Right
Screw, M6, HCS, 50 mm
Description
Front Cap
Screw, M6, HCS, 50 mm
Description
Top Cap
Tube Cap
Screw, 8 x ¾" Phillips
Grommet
Qty.
1
1
1
4
Qty.
1
4
Qty.
1
2
2
2
Advertisement
Table of Contents
