Bay-Tek AXE MASTER Service Manual page 34

CAMERA CALIBRATION MENU
Scroll through the options by pressing the "MENU" button.
Change selection with the "SELECT" button.
Scroll to "BACK" and press the "SELECT" button to go
Please use the "Auto Calibration" selection on the next page.
Press this if the real Axe on the playfield is more to the right than the video representation on the monitor.
Press this if the real Axe on the playfield is more to the left than the video representation on the monitor.
Press this if the real Axe on the playfield is higher than the video representation on the monitor.
Press this if the real Axe on the playfield is lower than the video representation on the monitor.
back to the main menu.
The following 4 options are for fine-tuning only.
Moves the camera frame to the right the distance of 1 pin.
10 represents a width of 1 finger pin on the playfield.
Moves the camera frame to the left the distance of 1 pin.
10 represents a width of 1 finger pin on the playfield.
Moves the camera frame up the distance of 1 pin.
10 represents a height of 1 finger pin on the playfield.
Moves the camera frame down the distance of 1 pin.
10 represents a height of 1 finger pin on the playfield.
Move Right
Move Left
Move Up
Move Down
34