Bay-Tek AXE MASTER Service Manual page 13

Install the left and right cage assemblies onto the
cabinet:
Using 2 people, lift the right side cage up onto the
cabinet.
Important: Make sure the center cable is pushed
under the cage and into the cabinet.
Secure the cage from the outside of the cabinet by
installing 2 bolts into each connector plate at the
top left and right edge of the wood piece as
shown.
Use 2 of the black ¼-20 X 1 Phillips head bolts
into each bracket using a # 3 Phillips Head bit.
A5BOPH312
Follow the same process with the right side cage assembly.
Secure the cages from the inside of the cabinet by carefully climbing inside the cabinet onto the
conveyor belt. Plug in the side cage lights to the cable coming from the cabinet.
(CE29048 to CE29017)
Secure the bottom of the cages to the wood with 6 of the black 10 X 5/8" screws
using a # 2 Square Head bit. 3 screws per bracket.
Follow the same process with the other side cage assembly.
AXE MASTER SETUP
Left end of
wood
13
Right end
of wood
A5SCPH152