Bay-Tek AXE MASTER Service Manual page 18

Slide in the roof panels:
Locate the 2 Roof Panels
Part # AADE29005
There are grooves in the sides of
the arches - Slide the roof panel
into this grove and continue
pushing up and around the arch.
Secure the roof panel to the side of the cabinet by installing 4 bolts into the metal bracket.
Use 4 of the black 10-24 X 1 1/2" Phillips head bolts per side using a Phillips Head bit.
Make sure both sides of the roof panel are secure.
Do the same for the 2nd roof panel.
Assemble safety wall:
Locate black plastic seam cover
(part # WACA29094)
This will attach to the back of the lower safety wall -
Instructions: Attach the black plastic seam cover to the back of
the lower safety wall using 6 of the black ¼-20 X 1 Phillips head
bolts using a # 3 Phillips Head bit.
Locate the 2 of the square metal connector plates.
(Label B) (Part # A5ME29021)
AXE MASTER SETUP
A5BOPH312
A5SCPH017
18
B