Bay-Tek AXE MASTER Service Manual page 16

Locate the Double Middle Arch-
(Labeled F)
Part # AAAR29005
Place this double middle arch
on the cabinet as shown.
Install so the bolt threads are pointing toward the back of
the game so they are not visible to the player.
Secure the double middle arch to the cabinet by installing
2 bolts through the wood into the arch as shown.
Use 2 of the black ¼-20 X 1 1/2" Phillips head bolts and 2 of
1/4" black washers per side using a # 3 Phillips Head bit.
Make sure both sides of
the arch are secure.
Attach monitor to the game:
Important: The monitor housing is large and heavy.
Use 2 or more people to lift monitor housing to the top of the
rear cabinet.
Remove the back door and position the top monitor housing
in place by aligning the oval cut-outs in the top of the game.
The monitor housing has the same oval cut-outs.
Once both oval cut-outs are posi-
tioned over one another, it should
be perfectly aligned.
Secure the monitor housing to the cabinet
by installing 2 bolts/washers/split washers
through the wood into the monitor housing
as shown.
Use 2 of the 3/8"-16 , 2 1/4 inch bolts with
split washers and washers using a 9/16"
wrench.
A5BOPH135
AXE MASTER SETUP
F
A5SCPP025
A5WALO010 A5WAFL050
A5WAFL090
Connect the
power cord to
the power cord
from monitor
housing.
16
Connect the
HDMI cable to
the HDMI cable
from monitor
housing.