Bay-Tek AXE MASTER Service Manual page 11

Prep left side cage for installation.
Locate left side cage assembly - (Labeled 1)
Part # AAME29000-L
toward the rear of the cabinet..
Locate Left upper cage support wood - (Labeled M)
Part # WACA29059
the middle of the wood.
Place the wood piece (M) on top of the cage piece (1)
The L mark must be on the inside of the cage.
The LED light stick will be on the inside pointing toward the
back of the game.
Secure the left wood to the top of the left cage using 6 of the
black 10 X 5/8" screws using a # 2 Square Head bit.
3 screws per bracket.
Locate the 2 of short metal connector plates.
(Label C) (Part # A5ME29013)
Install a short metal connector plate at the top left and right edge of
the wood piece as shown.
4 of the black ¼-20 X 1 Phillips head bolts using a # 3 Phillips Head
bit.
2 per bracket.
AXE MASTER SETUP
The LED light must point
Ensure it has the "L" etched in
M
A5BOPH312
A5SCPH152
C
Left end of
wood
11
1
Right end
of wood