Table of Contents
Advertisement
Parameter
Description
Enable the function, and then set the SIA protocol parameters for the
alarm receiving center (ARC).
●
●
●
●
●
Alarm Receive
Central
●
●
●
●
Preferred IP/Domain Name : Enter the IP/domain address and port
number of the ARC.
Alternative IP/Domain Name : Enter the alternative IP/domain
address and port number of the ARC.
Messages will be sent to the alternative IP/domain address only
when the preferred IP address fails to receive the message.
If Heartbeat interval is enabled, the system will judge whether to
send the message to the preferred or alternative IP address.
IP Protocol : Select TCP by default.
Heartbeat Interval : Set the heartbeat interval with the range from 0
second to 24 hours (60 seconds by default).
0 seconds means Heartbeat interval is disabled.
Central Account : Enter the account number that created by the ARC,
which is to be used to identify the hub when the hub sends information
to the ARC.
Reupload Period : Select the reupload period from the list.
Encryption : The hub uses an encryption format for information
security when you configure the ARC. AES128 is set by default.
Upload Events : Tap
next to an event to upload it.
Alarm : Alarm message.
Faults : Power failure, battery under-voltage, tamper, and offline.
Events : Prohibit the use of peripherals, add or delete peripherals,
and add or delete users.
Arm/Disarm : Message notifications of arming and disarming the
system.
Communication Test : Supports Manual Test and Scheduled Test.
Manual Test : Manually test whether the parameters of the
preferred and alternative alarm centers are normal. If the test is
successful, the center can receive the test event.
Scheduled Test : Scheduled test is disabled by fault. After enabling,
the hub reports periodic test event regularly.
45
User's Manual
Advertisement
Table of Contents
