Parameter
User Manager
Global Arming/
Disarming
Schedule Arming/
Disarming
Ringtone Setting
Table 4-3 Hub parameter description
Description
You can add, modify, or delete keypad users when it is disarmed.
Adding Users : Tap
●
passcode, and duress passcode, and then select arming and
disarming permissions for the room.
Passcode and duress code must be 4 to 6 digits.
Duress passcode is optional.
Up to 32 users can be created. The first created user is the admin
user by default. All the permissions are available to them.
Deleting User : Select the user, and then swipe left to delete the
●
user.
The admin user must be the last to be deleted.
Modifying User's Information : Tap the user you need to edit, and
●
then you can modify user's information, including username,
passcode, duress code, arming and disarming permission on the user
information page.
Adding Card : Tap
●
information page to add card for the user. Press any key to wake up
the keypad, and then place the card near the card swiping area of the
keypad to enter to the linking process within 30 seconds.
If the card information is successfully recognized, the card ID will be
displayed on the user information page, and then the keypad will
beep once. After you save the configurations, the card will have the
user's permissions.
Up to 8 cards can be linked to a user.
Deleting Card : Select the card, and then swipe left to delete the
●
card.
Arm or disarm all the detectors in all the areas with one tap.
Arm or disarm the areas by schedule.
Area : Select the area in which the hub operates.
●
Command setting : Select an armed mode as needed by tapping
●
Home, Away, or Disarm.
Time : Select the time period in which the hub operates.
●
Repeat : Copy the arming or disarming schedule.
●
Force Armed : You can arm the system when errors happen in zones.
●
The ringtone when entering or exiting the arming mode.
27
to add a user. Enter your username,
on the upper-right corner of the user
User's Manual