Table of Contents
Advertisement
Parameter
Description
You can add, modify, or delete keypad users when it is disarmed.
●
User Manager
●
●
●
●
Global Arming/
Arm or disarm all the detectors in all the areas with one tap.
Disarming
Table 5-3 Hub parameter description
Adding Users : Tap
to add a user. Enter your username, keypad
code (4 to 6 digits), and duress passcode (optional), and then select
arming and disarming permissions for the room.
Up to 64 keypad users are allowed (32 manually added users and 32
automatically created users). The first manually created user is the
admin user by default, and all the permissions are available to it.
DMSS automatically creates a keypad user every time when a device
is added for the first time. The sequence number of keypad users
created by the system automatically starts from 33, and has an icon
next to its account.
A keypad user will be automatically created for shared users.
Figure 5-11 Add keypad user
Deleting User : Select the user, and then swipe left to delete the user.
The admin user must be the last to be deleted.
Modifying User's Information : Tap the user you need to edit, and
then you can modify user's information, including username, passcode,
duress code, arming and disarming permission on the user information
page.
Adding Card : Tap
on the upper-right corner of the user
information page to add card for the user. Press any key to wake up the
keypad, and then place the card near the card swiping area of the
keypad to enter to the linking process within 30 seconds.
If the card information is successfully recognized, the card ID will be
displayed on the user information page, and then the keypad will beep
once. After you save the configurations, the card will have the user's
permissions.
Up to 8 cards can be linked to a user.
Deleting Card : Select the card, and then swipe left to delete the card.
42
User's Manual
Advertisement
Table of Contents
