Table of Contents
Advertisement
5.3 Configuring Alarm Linkage Video
Configure the alarm linkage for peripherals so that you can view video clips when the alarm is
triggered.
Prerequisites
Make sure that the hub is armed before you configure the alarm-video linkage.
●
Make sure that you have added peripherals to the hub.
●
Procedure
Step 1
On the hub screen, select a peripheral in the Peripheral list, and then tap
Device Details screen to configure the parameters.
Step 2
Enable Alarm-video Linkage , and then select Video Channel.
Select a video channel from the Linked Channel list, and tap Save.
Step 3
Figure 5-9 Configuration screen
38
User's Manual
on the
Advertisement
Table of Contents
