Adding Dmss Admin Users - Watchguard ALMKIT-D1 User Manual

4.3.1 Adding DMSS Admin Users

For installer, you can add DMSS admin users by sharing entrusting devices with them or accepting
their entrusting request.
Background Information
According to EN50131 certifications, the DMSS admin user does not have permission to configure
the device when installers lend the hub to them, or when they entrust the hub to the installer.
4.3.1.1 Lending the Device to the DMSS Admin Users
According to EN50131 certifications, the installer can lend the hub to the DMSS admin user.
Afterwards, the installer needs to apply for permissions from the DMSS admin user, such as device
configuration, arming and disarming operations, and user management.
Make sure that the hub has not been added by other accounts.
Procedure
On the Home screen, tap , and then it goes to Site screen.
Step 1
Step 2 Tap
In the device list, select a hub, tap Lend on the right corner of the hub.
Step 3
Step 4 Enter email of the DMSS admin user.
Enable Reserve Configuration Permissions and select retention time.
Step 5
Step 6 Tap Confirm.
Figure 4-7 Lend the hub to the DMSS admin user
on the upper-left corner to switch to Device mode.
18
User's Manual