Table of Contents
Advertisement
Tap Next if the system identifies the device type automatically.
Step 4
On the Add Device screen, customize the device name, enter the username and the
device password, and then tap Save.
Step 5
Configure network settings.
1. On the Add Device , tap Next to join the hotspot of the hub.
2. When the connection is established successfully, tap Select Network Config Type.
3. Select the network types you want to configure.
Wired network: Enable DHCP function, or manually enter the IP address, subnet mask,
●
gateway, DNS and MAC address.
Cellular: Configure the APN, Auth mode, username, password, dial number, roaming
●
data and PIN for the SIM card.
Wi-Fi: Select a Wi-Fi network, and then enter the password to connect to it.
●
5.2.2 Adding Peripheral
For end users, you can add multiple peripherals into the hub. The operations to add peripherals on
DMSS are the same as that on Dolynk Care app. For details, see "4.2.2 Adding Peripherals".
Figure 5-3 Configure network types
34
User's Manual
Advertisement
Table of Contents
