Table of Contents
Advertisement
5.4 Hub General Settings
After adding devices, including the alarm hub and peripherals, you can view and edit general
information of the device.
Procedure
Step 1
On hub screen, tap
Parameter
Hub Status
Hub Setting
Main Power Failure Delay
LED Indicator
Network Configuration
Time Zone
Device Sharing
Device Languages
Device Entrusting
User's Manual
Cloud Update
Figure 5-10 Linked channel
to go to Device Details screen.
Table 5-1 Parameter description
Description
View status of the hub.
Configure parameters of the hub.
Set the delay time for all the devices on the system to activate
functions when the main power supply is disconnected.
Enable the function so that the LED indicator of the hub can work.
Tap Network Configuration to view your present network
information.
Tap Time Zone to select your time zone, and enable DST (daylight
saving time) if necessary.
Time Zone : Select the time zone in which the hub operates.
●
DST : Select date or week, and then select start time and end time.
●
Tap Device Sharing to share the status of the hub with the other
users.
Select the language for the hub from English, Spanish, Arabic, Dansk,
French, Italian and Turkey.
Entrust devices to service providers for them to perform alarm
operation services for you.
Tap User's Manual to obtain the user's manual of the alarm hub.
Update online.
Update is not allowed when the hub is in armed status or the battery
level is low.
39
User's Manual
Advertisement
Table of Contents
