Table of Contents
Advertisement
3. Follow the on-screen instructions, and then tap Next.
4. Wait for the pairing.
If failed, repeat the above procedures.
Wired
●
1. Tap Wired on the upper-right corner, and then Wired becomes Wireless.
2. Connect the device to power and the network, and then tap Next.
If failed, repeat the above procedures.
Step 8
If the hub you are adding is uninitialized, enter password and confirm it again, and then
tap Initialize the device to complete initialization.
Tap Completed, and then you can view the device in the device list.
Step 9
4.2.1.2 Adding by LAN Searching
You can search for devices and add them. Make sure that your phone and the devices are
connected to the same network.
Procedure
On the Home screen, tap
Step 1
Step 2
Select a site and tap Add Device to add a device.
Step 3
Tap LAN Searching.
On Add Device screen, enter device password, and then tap Confirm.
Step 4
to Site screen.
Figure 4-5 Add a device
16
User's Manual
Advertisement
Table of Contents
