Related Manuals for Watchguard XTM 1520
Summary of Contents for Watchguard XTM 1520
- Page 1 WatchGuard XTM 1500 Series Hardware Guide XTM 1520, 1525 XTM 1520-RP, 1525-RP SL8AE14 SL15AE14...
- Page 2 Copyright© 1998–2013 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies, Inc.
-
Page 3: Hardware Specifications
Our security subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-based exploits, and blended threats. From firewall and VPN protection to secure remote access, WatchGuard XTM devices support a broad range of network environments. -
Page 4: Package Contents
16 GB Hard Drive 250 GB Power supply 1 100–240 VAC, 1.2A MAX, 50/60 Hz Autosensing (XTM 1520, 1525) 2 100–240 VAC, 4.0A MAX, 50/60 Hz Autosensing (XTM 1520-RP, 1525-RP) Dimensions D=16.5” (42 cm) total depth; includes front handles D=15.75” (40 cm) rack mount depth; does not include front handles W=19”... -
Page 5: Interface Specifications
Hardware Specifications Interface Specifications 14x 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps), RJ45 connector Network interfaces XTM 1520 6x 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps), RJ45 connector Network interfaces XTM 1525 4x 10G/1G SFP+ fiber ports Duplex LC connectors... -
Page 6: Hardware Description
Dual USB interfaces Connect a USB storage device to use for USB backup and restore, or to store a support snapshot. For more information about USB functions, see the current WatchGuard System Manager Help or Fireware XTM Web UI Help. - Page 7 From the left, the indicators and connectors are: Network interfaces — XTM 1520, 1520-RP XTM 1520 has a total of 14 network interfaces. All network interfaces have standard RJ45 connectors and are labeled 0, 1,2, 3…13. Network interfaces — XTM 1525, 1525-RP The XTM 1525 has a total of 10 network interfaces.
- Page 8 Data sent and received the data flow increases) No activity Rear View - XTM 1520, 1525 The AC receptacle, power switch, and fans are located on the rear of the device. Fans The fans decrease the internal temperature of the device. The fans start at maximum RPM when the device is powered on.
- Page 9 WatchGuard standard auto-sensing AC power supply. Replaceable power supplies and power switch There are two power supplies on the XTM 1520-RP and 1525-RP devices, each with a power indicator light at the top. The power switch activates both power supplies.
- Page 10 Hardware Specifications Power Supply Replacement Instructions The XTM 1520-RP and 1525-RP have redundant hot-swappable power supplies. You can replace a power supply while the device is powered on, with the power connected to the other power supply. Caution The power supply can be extremely hot when first removed. Avoid any contact until the metal has cooled.
-
Page 11: Rack Mount Instructions
Hardware Specifications Rack Mount Instructions Each WatchGuard XTM 1500 Series device is shipped with a rack mount kit. When you install the device in a rack, make sure you consider: Elevated Operating Ambient Temperature If you install the device in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. -
Page 12: Safety Notices
Hardware Specifications Safety Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Read these instructions carefully before you operate the product, and refer to them as needed for continued safe operation of your product. - Page 13 Hardware Specifications Sicherheitshinweise Alle WatchGuard Produkte wurden entwickelt und getestet um die strikten Sicherheitsrichtlinien zu erfüllen. Diese Richtlinien beinhalten Produktsicherheit Freigaben und andere weltweite Sicherheitsstandards. Vor Inbetriebnahme des Produktes lesen Sie die Anleitung sorgfältig durch und bei Bedarf beziehen Sie sich auf sie für einen dauerhaft sicheren Betrieb Ihres Produktes.
- Page 14 LCD screen and the factory default IP address for Eth1 is 10.0.1.1/24. Recovery Mode You can start your WatchGuard XTM device in recovery mode if you want the WSM Quick Setup Wizard to force a Fireware XTM v11.x OS installation regardless of the version that is currently installed.
- Page 15 Hardware Specifications LCD Keypad Button Control Below the LCD screen, there are four arrow buttons. Up Arrow Press this button to increase the value of a selected item, or move up in a group menu. Down Arrow Press this button to decrease the value of a selected item, or move down in a group menu. Left Arrow This is the “selection”...
- Page 16 To move forward through the list of categories, press the Right Arrow button. To move up and down in the menu and see information in a category, press the Up Arrow and Down Arrow buttons. To stop the auto-cycle of the LCD screen, press any button. WatchGuard XTM 1500 Series...
- Page 17 Hardware Specifications Example To see the CPU temperature of the XTM 1500 Series device on your LCD screen: 1. Press the Right Arrow button to scroll through options until Hardware Monitor appears. 2. Press the Down Arrow button to see the options below that menu item. 3.
- Page 18 Hardware Specifications WatchGuard XTM 1500 Series...
-
Page 19: Legal And Regulatory Information
WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of this card, as applicable: 1. - Page 20 WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE...
-
Page 21: Declaration Of Conformity
Legal and Regulatory Information Declaration of Conformity Hardware Guide... - Page 22 Legal and Regulatory Information WatchGuard XTM 1500 Series...
-
Page 23: Fcc Certification
This device must accept any interference received, including interference that may cause undesired operation. CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). -
Page 24: Vcci Notice Class A Ite
ATTENTION: IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE, REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D’UN TYPE ÉQUIVALENT RECOMMANDÉ PAR LE CONSTRUCTEUR. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT. WatchGuard XTM 1500 Series... -
Page 25: Rohs Statement
Legal and Regulatory Information People’s Republic of China Electronic Industry Standard This table is presented in accordance with SJ/T11364-2006, Marking for Control of Pollution Caused by Electronic Information Products, implemented in November 2006. RoHS Statement The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous Substances (“RoHS directive”‘) that became valid on July 1, 2006. -
Page 26: Weee Statement
WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at: U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456... - Page 27 Legal and Regulatory Information Licensing Some components of the WatchGuard System Manager software are distributed with source code covered under one or more third party or open source licenses. You can find full licensing information in the product documentation on our public web site at www.watchguard.com/help/documentation. We include below the full text of the GNU General Public License.
-
Page 28: Gnu General Public License ("Gpl")
To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. WatchGuard XTM 1500 Series... -
Page 29: Terms And Conditions For Copying, Distribution, And Modification
Legal and Regulatory Information Terms and Conditions for Copying, Distribution, and Modification 1. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program”... - Page 30 License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the WatchGuard XTM 1500 Series...
- Page 31 Legal and Regulatory Information Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
- Page 32 INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. WatchGuard XTM 1500 Series...
Need help?
Do you have a question about the XTM 1520 and is the answer not in the manual?
Questions and answers