Sleep Function - TechniSat Transita 121 IR Operating Instructions Manual

can be set individually. The settings for alarm clock 1 will now be explained as an example. To
confirm each setting step and move to the next, press the OK/SNOOZE knob. To change the
option, rotate the OK/SNOOZE knob until the desired option appears in the display.
> First select with the OK/SNOOZE knob in menu > [Main menu] > [Alarm clock].
> Select [Alarm 1] and press the OK/SNOOZE knob.
The alarm clock configuration is displayed. Here you can set the repeat, source, time
and e.g. B. alarm volume. Review each item and then select Save at the end of the list.
> Repeat: Determines when and if the alarm should repeat. The Off setting turns the
alarm clock off. You also have a choice between daytime, one-off, weekend and
working days. To accept the setting, press the OK/ SNOOZE knob.
> Time: set the time at which the alarm clock should go off. If you previously
selected [Once], after this step you must also enter the date on which the alarm
clock should be active.
> Mode: Select the source to be played as an alarm signal.
> Programme: If you have selected Internet, DAB+ or FM radio, you can then choose
whether to play the last station you heard or a station from your favourites list. Select
the appropriate option and, if necessary, the channel.
> Volume: Then use the OK/SNOOZE knob to select the volume of the alarm clock.
> To save the alarm clock configuration, select [Save] and press the OK/SNOOZE
rotary button.
The alarm clock symbol will now appear on the display.
> If you want to switch the alarm clock off again later, simply select Menu >
[Main menu] > [Alarm clock] > [Alarm clock 1] > [Off].
If you want the alarm clock to be switched off when you wake up, simply press the VOLUME/
ON/STANDBY knob.
To use the snooze function when the alarm is active, press the OK/SNOOZE knob. Each time you
press the OK/SNOOZE knob, you can change the snooze time between 5 and 10 minutes.
14.2 Function sleep
Use the sleep function to play music for a set period of time.
When the set time has elapsed, the Transita 121 IR automatically enters standby mode.
> Open the menu and use the OK/SNOOZE knob to select > [Main menu] > [Sleep].
Turn the OK/SNOOZE knob to select the time at which you want the radio to switch
off. The available settings are Off, 15, 30, 45, 60 and 90 minutes. Confirm your selection
by pressing the OK/SNOOZE knob. The remaining time is shown on the display by a
symbol in the status bar.
Seite 24