Epilog Laser Fusion Maker Assembly Replacement page 7

17000 X-Axis Assembly Replacement
8. Install x-axis drive board cover:
9. Install the lens tube assembly in the
x-axis assembly:
10. Replace the left and right panels of
the engraver:
Updates and Programming
The x-axis assembly contains many
components, including circuit boards,
cameras, and a motor. Further
procedures are required.
Updating the Carriage
Camera (Pro Models Only)
1. On the display, press the gear icon to
enter the Settings menu:
2. Press and hold the word "Settings" that
appears at the touch of the touchpad
to gain access to the Advanced
Settings menu:
7