Burkert 8694 REV.2 Operating Instructions Manual page 33

Type 8694 REV.2
Control and display elements
7.5.1.1 Valve mode
Displays in valve mode:
• Valve position: open, half-way, closed
• Device status: Error
Valve position Valve position
status, color
Open is lit yellow
Half-way is lit white
Closed is lit green
Table 10: Valve mode
7.5.1.2 Valve mode + warnings
Displays in valve mode + warnings:
• Valve position: open, half-way, closed
• Device status: failure, function check, out of specification, maintenance required (according to NAMUR)
Valve position
Status, color
Open is lit yellow
Half-way is lit white
Closed is lit green
Table 11: Valve mode + warnings, normal operation
If several device statuses exist simultaneously, the device status with the highest priority is displayed.
Valve position Device status
Failure
Status,
color
Open flashes red flashes orange
Half-way flashes red flashes orange
Closed flashes red flashes orange
Table 12: Valve mode + warnings, device status
For warning messages, the LEDs are briefly switched off between the change of the colors.
For localizations, the colors are only shown momentarily.
18) Factory setting, selectable colors for the valve position: Off, white, green, blue, yellow, orange, red
19) As of firmware A.1.6
Device status: Error
status, color
flashes red
18)
flashes red
18)19)
flashes red
18)
Device status
Normal operation
--
18)
--
18)19)
--
18)
Function check Out of
specification
Status, color Status, color
flashes yellow
flashes yellow
flashes yellow
alternately with yellow
alternately with white
alternately with green
Maintenance
required
Status, color
flashes blue alternately with yellow
flashes blue alternately with white
flashes blue alternately with green
english
18)
18)19)
18)
18)
18)19)
18)
33