Intended Use - Burkert 8694 REV.2 Operating Instructions Manual

Type 8694 REV.2

Intended use

2 INTENDED USE
The Positoner Type 8694 REV.2 is designed to be mounted on pneumatic actuators of process valves
for the control of media. The permitted fluid media are listed in the technical data.
▶ Use the device for its intended purpose only. Non-intended use of the device may be dangerous to peo-
ple, nearby equipment and the environment.
▶ Correct transportation, correct storage as well as correct installation, commissioning, operation and
maintenance are essential for reliable and problem-free operation.
▶ When using the device, observe the permitted data, operating conditions and application conditions.
This information can be found in the contractual documents, the operating instructions and on the type
label.
▶ Use the device only in conjunction with third-party devices and components recommended and autho-
rized by Bürkert.
▶ Do not use the device outdoors without protection from the weather.
▶ In potentially explosive atmosphere, only use devices approved for use in those areas. These devices
are labeled with a separate Ex type label. For such use, note the information provided on the separate
Ex type label and the additional explosion-related information or separate explosion-related operating
instructions.
english
9