Table of Contents
Advertisement
14
IO-LINK
14.1
Information, IO-Link
IO-Link is an internationally standardized IO technology (IEC 61131-9) to enable sensors and actuators to
communicate.
IO-Link is a point-to-point communication with 3-wire connection technology for sensors and actuators and
unshielded standard sensor cables.
To ensure clear communication, the IO-Link devices should not be parameterised simultaneously by the
higher-level controller (PLC) via the IO-Link master and with the Bürkert Communicator (via the service
14.2
Technical specifications, IO-Link
IO-Link specifications
Supply
Port Class
SIO mode
IODD file
VendorID
DeviceID
ProductID
Transmission speed
PD Input Bits
PD Output Bits
M-sequence Cap.
Min. cycle time
Data storage
Max. cable length
14.2.1
Configuration of the fieldbus
The required start-up files and the description of the process data and acyclic parameters are available on
the Internet.
Download from:
www.burkert.com / Type 8694 / Software
62
V1.1.2
via IO-Link (M12 x 1, 5-pin, A-coded)
B
no
see Internet
0x0078, 120
see IODD file
8694
COM3 (230.4 kbit/s)
80
40
0x0D
5 ms
Yes
20 m
english
Type 8694 REV.2
IO-Link
Advertisement
Table of Contents
