Table of Contents
Advertisement
1.2 Master M device
Front
1.
Transportation handle (also for mechanical lifting when the device is not installed on a cooling unit or cart)
2.
Control panel
3.
LED work lights with light switch in the middle
>> Light switch: First press turns the lights on (full brightness), second press dims the lights (medium brightness),
third press turns the lights off
>> Includes a built-in battery (the battery is charged when the equipment is connected to mains)
4.
Control cable connector
5.
Earth return cable connector
6.
Welding cable euro connector
7.
Front locking interface
>> For locking on top of the cooling unit or on the cart
8.
Connector for subfeeder synchronization kit (optional)
9.
Wire feed cabinet hatch.
Rear
1.
Shielding gas hose connector
© Kemppi
8
Master M 353, 355
Operating manual - EN
1921960 / 2307
Advertisement
Table of Contents
