Advertisement
Figure A
detail
Flush base with top
ofs.com
imagine a place®
Gathr assembly instructions
Gathr Obeya corner assembly
Tools/hardware required:
Impact screwdriver
#2 Quad drive bit
Level
Hardware: HK-10
1.
Place your corner top face down on a non-marring surface and position the base to be flush on
the back corner edges of the top. (Figure A)
2.
Attach base to underside of corner top with four L brackets (two on each side) and 5/8" pan
head screws. (Figure B)
Figure A
800.521.5381
Figure B
detail
Assembly instructions
Figure B
11
Advertisement
