Advertisement
ofs.com
imagine a place®
Gathr assembly instructions
Gathr Obeya straight assembly
14. If a back panel is specified, attach the back panel to the back of the straight unit with three
L-brackets and 5/8 pan head screws from HK-10 Hardware. (Shown in step 11, Figure G) Note:
The top panel will come preinstalled on the straight units. (Figure J)
If the straight unit is connecting to a corner unit or another straight unit, see Connecting
15.
Ganging Seats page
16. If the straight unit is to be freestanding, add four of the button fix using the pre-drilled holes for
attaching the decorative end panel. See Attaching End Panels on page 3.
Top panel on
straight module
800.521.5381
Figure J
Assembly instructions
16
Advertisement
