Advertisement
End panel flush to end
of top corner panel
ofs.com
imagine a place®
Gathr assembly instructions
Gathr Obeya corner assembly continued
7.
Align the first seating module with the corner top.
7.
Locate the pre-drilled holes in the case spacer for attaching the top panel. Attach using HK-15
hardware.
8.
Place the next seating module and gang together using instructions in Attaching Ganging Seats
on page 3. Then attach to corner top using the previous step.
9.
Repeat steps 1-9 for remaining seats.
End panel
detail
800.521.5381
HK-15
Figure F
Assembly instructions
Corner top
panel detail
14
Advertisement
