Advertisement
Pre-drilled holes
ofs.com
imagine a place®
Gathr assembly instructions
Gathr Hydra assembly - Ganging units together
Note: HK-248 hardware kit is used to connect units with frame, HK-251 hardware kit is used to
connect units that have an upholstered panel
5.
To attach frames together, use HK-248 hardware kit and pre-drilled holes in frame to bolt frames
together (Figure A). Note: Upholstered panels will not bolt together
6.
Use the planter cutout to access the pre-drilled holes for attached planter boxes together. Use
provided hardware HK-248/HK-251 and use the pre-drilled holes to bolt units together.
(Figure B)
Once seats, panel, and planter are attached to each other to make a complete single unit, you can
move forward ganging the units together. Note: Bolt seats together using instructions in Attaching
Ganging Seats on page 3.
Figure A
(Shown without seat or planter)
Pre-drilled holes
800.521.5381
Figure B
(Shown without seat or frame)
Assembly instructions
Access point inside
planter cutout
10
Advertisement
