13 #8 x 5/8” Pan Head Screws (HK-105) LEG ASSY CTR LEG ASSY CROSS RAIL (UNDER) CROSS RIAL- UNDER CROSS RAIL- OVER BRACE LEVELER SCREW SCREW SCREW SCREW SCREW Riff Tables by OFS | Assembly Instructions Page 2 of 7...
Page 3
• Secure bases to Under top assembly with #8 x 5/8" pan head screws (HK-105). 96" long tops only 96" long tops only Page 3 of 7 Riff Tables by OFS | Assembly Instructions Series: Verve X1 Part #:...
Page 4
Align holes with Straight holes in base rail holes in Base Rail Straight Angled Tennon Angled tennon tennon Tennon Mortise Mortise 96" long tops only 96" long tops only Riff Tables by OFS | Assembly Instructions Page 4 of 7...
Page 5
#8 x 2" Pan Head Screws (HK-102). #8 x 2 ½" Pan Head Screws (HK-101). #8 x 2" pan head screws (HK-102). #8 x 2 1/2" pan head screws (HK-101) Page 5 of 7 Riff Tables by OFS | Assembly Instructions...
Page 6
Bases to Worksurface. #8 x 1 ¼" #8 x 1 1/4" #8 x 5/8" #8 x 5/8" #8 x 2 ½" #8 x 2 1/2" Riff Tables by OFS | Assembly Instructions Page 6 of 7...
Page 7
If Plug and Play in-feed is used, all duplex receptacles will be circuit 1. Power in-feed If Plug and play in-feed is used, all duplex receptacles will be circuit 1. Power in-feed (hard-wired) (hard-wired) Series: Verve X1 Part #: Page 7 of 7 Riff Tables by OFS | Assembly Instructions...
Page 8
PART # 1572705 INSTRUCTION SHEET # 2546INS Riff Tables WORK TABLE ASSEMBLY INSTRUCTIONS 10.15 an OFS Brands company | 1204 East Sixth Street | Huntingburg, IN 47542 | 800-521-5381 | ofs.com ™...
Need help?
Do you have a question about the Riff and is the answer not in the manual?
Questions and answers