Advertisement
ELEVEN COLLABORATIVE
Support Brace Assembly
THIS STEP IS NOT USED ON ALL TABLES
NOTE: Frame is assembled upside-down. Frame
is to be flipped over after legs are installed.
NOTE: Frame is assembled upside-down .
NOTE: This step is used only on trapezoid tables
Frame is to be flipped over after legs are installed .
and some boat-shaped tables.
NOTE: This step is used only on trapezoid tables and some boat-
shaped tables .
Position Support Brace so counter-sunk holes
in Outside Leg Insert rail are aligned with holes
on end of Support Brace.
Instructions
Insert Flat Head Cap Screws and tighten with
5MM allen wrench.
• Position Support Brace so counter-sunk holes in
Outside Leg Insert rail are aligned with holes on end
of Support Brace .
• Insert Flat Head Cap Screws and tighten with 5MM
allen wrench .
3
SUPPORT BRACE ASSEMBLY
(This step is not used on all tables)
Flat Head Cap Screw
Completed Assembly
CONFERENCE TOPS
Assembly Instructions
Outside Leg Rail
Support Brace
Advertisement
