Wc Facility With Dali Lamps - ABB Busch E-contact System Manual

4.2.7

WC facility with DALI lamps

Function
In a WC facility, the lighting with DALI lamps are to be regulated via a Busch-Presence detector
in an intelligent manner.
The lighting is controlled depending on movement and brightness.
The fan should only be activated according to detected movement and with a switch-off delay.
Installation and settings
Fig. 37: Application example: DALI in a simple WC facility
Depending on the room divisions, it is necessary to install several Busch-Presence detector
using active extension units in order to be able to monitor the individual areas (wash basins,
urinals, individual cubicles as necessary).
The lighting is controlled directly depending on movement and brightness.
Integration of the ventilator
1. Application:
The ventilator should start with a switch-on delay of 30 seconds and run for up to 10 minutes:
Parameter settings are made via the smartphone app "ABB Watchdog Remote control". Switch
there to HVAC mode. There into the "Switch-on delay/switch-off delay" function.
System Manual 2CKA001473B9577
Information about planning and application
│85