Table of Contents
Advertisement
2.2.3
ABB flexTronics
In the following you will find an overview of actuators and sensors for the implementation of
lighting control via movement detectors flex.
The brief descriptions of the characteristics provide an initial orientation. For a detailed overview
of the characteristics and applications of the devices, see the following items:
Characteristics (device functions): see chapter 3 "Device Functions" on page 23
■
Applications: see chapter 4.2 "Case studies" on page 61
■
The following actuator versions are available for combining presence detector detector
attachments with actuators.
System Manual 2CKA001473B9577
®
E-contact
64814 U-500
e-contact insert flex, 1-
gang
64811 U-500
Relay insert flex, 1
gang
64821 U-500
Relay insert flex, 2
gang
64891 U-500
Sub-insert flex
Dimmer
64851 U-500
LED dimmer insert flex,
1gang
Overview of product range
Residential applications and old installations in
locations where an N-busbar is not available.
– Noiseless switching of lighting systems.
– 2-wire connection (neutral busbar is not
required, but can be connected as an option)
For all popular applications
– Switching of lighting systems.
– 2gang relay insert is required for additional
heating, air conditioning and ventilation-
applications.
– 3-wire connection system (neutral
conductor is required).
For all popular applications
– Expansion of the detection range.
– Setup of extension operation.
– 3-wire connection system (neutral
conductor is required).
For all popular applications
– The device is used for switching and/or
dimming lighting systems.
– 2-wire connection system (neutral busbar is
not required, but can be connected as an
option).
│11
Advertisement
Table of Contents
