Table of Contents
Advertisement
Information about planning and application
2. Application:
The ventilator starts with a switch-on delay, but only if a movement is detected over a longer
period (e.g. 5 minutes). This is intended to prevent the ventilator being activated when someone
enters the toilet facility just briefly. If movement is detected over a longer period the ventilator
should continue for some time. The switch-on delay is based on the frequency of movement in
the first few minutes.
Parameter settings are made via the smartphone app "ABB Watchdog Remote control". Switch
there to HVAC mode. There into the "Switch-on delay/switch-off delay" function.
Examples of switching
5
4
16A
L
N
1
3
2
Fig. 38:
Examples of switching: DALI light control with extension unit input for simple WC facility
[1] 6819/35-xxx-500 Universal BT, DALI
[2] When using voltage enabling of DALI operating devices
[3] DALI lamp
[4] Option: Voltage enabling of DALI operating devices is not used.
[5] Extension unit push-button
System Manual 2CKA001473B9577
│86
Advertisement
Table of Contents
