ABB Busch E-contact System Manual page 38

Table of Contents

Continuous OFF

–

The lighting is continuously switched off. For devices with infrared remote control, the

duration amounts to 8 hours. For devices with Bluetooth function, the duration is freely

selectable via the smartphone app "ABB Watchdog Remote control".

–

To activate this function, press the corresponding button on the IR service remote control

6843.

–

A renewed press of the button on the remote control deactivates the continuous light OFF

function.

–

Only Monoblock devices:

–

The continuous light is operated using a separate switch connected via the 6494-500

Extension unit connection.

–

For the activation of this function, a push-button is connected to channel 2 of the 6494-

500 Extension unit connection. In the case of the DALI main unit, the "Continuous Light"

function must be activated via the extension push-button.

–

The return to automatic mode and/or previously selected operation mode is

implemented through one of the following possibilities:

Push-button/extension operation (directly connected to the extension unit input 1C of

■

the presence detector).

Simultaneous actuation of the push-buttons for "Continuous ON" and "Continuous

■

OFF".

Via app.

■

Automatic after the expiration of the "Continuous OFF" time.

■

–

This function cannot be combined with the panel light.

System Manual 2CKA001473B9577

Device Functions

│38

Table of Contents