About Terminology - Magtek DynaFlex II Go Installation And Operation Manual

1 - Introduction
Part No. Description
21078402 DynaFlex II Go, PCI, BCR,
BLACK
21078403 DynaFlex II Go, PCI, BLACK
Table 1-2 - DynaFlex II Go Accessories
Part #
CABLE, USB-C TO USB TYPE A MALE USB 2.0,
1000005076
20AWG
1000007600 CABLE, USB-C FEMALE, USB-A MALE, 3FT
CABLE, ANGLE USB-C MALE, USB-C FEMALE,
1000007604
3 FEET
1.3

About Terminology

In this document, DynaFlex II Go products are referred to as the device. They are designed to be
connected to a host, which is a piece of general-purpose electronic equipment which can send commands
and data to, and receive data from, the device. Host types include PC and Mac computers/laptops, tablets,
and smartphones. Generally, the host must have software installed that communicates with the device
and is capable of processing transactions. During a transaction, the host and its software interact with the
operator, such as a customer service representative, while the device interacts with the cardholder (even
if the cardholder is using a virtual representation of the card account, such as a smartphone).
DynaFlex II Go| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Display Connection(s)
None USB-C
None USB-C
Description
Page 7 of 55 (D998200595-100)
MS Windows, Mac OS,
Linux; Android Phone
MS Windows, Mac OS,
Linux; Android Phone
Accessory Notes
Optional, specify in order
Optional, specify in order
Optional, specify in order