Magtek DynaFlex II Go Installation And Operation Manual page 53

Appendix C - Warranty, Standards, and Certifications
This product has been evaluated by multiple safety certification agencies, including
Underwriters Laboratories (UL) and the United States Federal Communications
Commission (FCC Class A and Class B), and is designed to protect both the user and the
device. This document is written specifically to work in conjunction with these safety and
integrity features to protect the user and the device. It is very important to follow all steps
in the product documentation carefully, in the order in which they are described, and at
the recommended times. Failure to do so could result in personal injury, and / or cause
damage to the device, and / or void the product warranty.
SAFETY REQUIREMENTS
Never do any of the following:
•
DO NOT use a ground adapter plug to connect equipment to a power socket-outlet that lacks a
ground connection terminal.
•
DO NOT attempt any maintenance function that is not specifically described in this manual or in
other ExpressCard 3000 instructional documents published by MagTek.
•
DO NOT remove any of the covers or guards that are fastened with screws. There are no user-
serviceable areas within these covers.
•
DO NOT override or "cheat" electrical or mechanical interlock devices.
•
DO NOT use EC3000 supplies or cleaning materials for other than their intended purposes.
•
DO NOT operate the equipment if you or anyone else have noticed unusual noises or odors.
Consider the following before operating the ExpressCard 3000:
•
Connect the EC3000 to a properly grounded AC power socket-outlet. If in doubt, have the socket-
outlet checked by a qualified electrician. Improper connection of the device's grounding conductor
creates a risk of electric shock.
•
Place the EC3000 on a solid surface that can safely support the device's weight plus the weight of a
person leaning against it (such as a service technician).
•
Be careful when moving or relocating the device. Use proper lifting techniques.
•
Use materials and supplies specifically designed for MagTek devices. Using unsuitable materials
may result in poor performance, and in some cases may be hazardous.
DynaFlex II Go| EMV Contactless/NFC Card Reader | Installation and Operation Manual
SAFETY
Page 53 of 55 (D998200595-100)